View Single Post
  #128  
Old 18-11-15, 22:38
Alex van de Wetering Alex van de Wetering is offline
Moderator
 
Join Date: Mar 2003
Location: Hoofddorp, The Netherlands
Posts: 2,670
Default

The filling station sleeved my second master cylinder (thanks again Guido) and also supplied new U-bolts for the front axle. The correct size for the C8 was not available from stock, but they made a set of slightly longer bolts for just a few dollars extra.

This time with the master cylinder I cleaned all threads thoroughly and installed the cylinder after marking the studs with a white line.....just to make sure the studs wouldn't turn while securing the nuts (studs secured by hand this time and secured with some Lock tite).

The shock links were far gone. I tried finding replacements, but didn't have much luck.

Alex
Attached Thumbnails
IMG_8073.JPG   IMG_8379.JPG   IMG_7738.JPG  
__________________
Chevrolet C8 cab 11 FFW
BSA Folding Bicycle
Reply With Quote