Nick, thanks for the pix. I see both trucks have the vents and tie bar between the fenders. Do the seats fold?
In the excerpt I posted from Gregg's book it states that the longitudinal sills and the cross sills were hardwood and the rest was softwood. Being Canadian production the hardwood would be oak and the softwood would be fir. Pine would be too soft a wood for this purpose.
Were the sides on your body made from two wide boards or four narrow boards?
If you can find the time could you take some measurements for me? It would be greatly appreciated.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
|