So that works out to be 13 (maybe going on 20?).
2 in BC, Canada
1 in the US ( there's gotta be more)
6 (at least) in Australia
1 in England (again, likely more)
1 in Ontario Canada
1 in Alberta Canada
1 in NZ
So the club isn't as exclusive as I thought it was.
I have another question: I backed off the large track tensioning nuts on both sides since the tracks had been severely overtightened for some reason. Neither idler moved back to loosen the track. They were stuck. After reversing and neutral steering, the left hand one snapped back, simultaneously extruding a ton of grease (I think it was hydrolocked with grease), so I can see sag in that track now. But the right hand one is stuck despite some subsequent reversing and steering in the display bay.
The manual says reversing the tank should pull it back.
We may have to wait for the mud hole outside to freeze so we can take it outside and drive it for a bit to see if this frees it up.
Any suggestions on getting the track tensioner to release?
I'm going to try some heat.
Malcolm