[jack neville]

After completing the bulk of the cab I gave it a coat of Fishoil and let it dry out for a month. Then a coat of red oxide primer. The timber framework was primed and glued and screwed and fitted to the rear of the cab. I stripped the side panels and patched the bottom rusty sections using the spot welder. These panels were then welded back in place and the rear ends nailed to the timber work. Once the side panels are in place the inside cover panels at the top of the sides are then welded together over the timber. This means that you need a spray bottle to stop the timber catching fire as you weld it. I know it sounds weird, welding sheet metal over timber. As I said earlier, these roadster cabs are a unique Australian pattern and appear to be a blend of the modern (40's modern) sheet metal work with the old coach building skills, even though the cabs were built in the Geelong Ford factory during the early war years. The weirdest bit is yet to come.