Darryl, the 8-13/16" dimension you wanted checked comes up as being 9-3/16"on the hull I looked at.
To give a further check I measured the distances from the outside edge of the body i.e. including the thickness of the side armour:- to hole centres:-
Distance to first pair of holes 3".
Distance to first group of four holes. (nearest holes in the group) 15-1/2".
Distance to second group of four. (Ditto) 26-1/2".
Couldn't measure to the centre group because they are covered by a welded plate mounting the stud for spare wheel attachment.
David
__________________
Hell no! I'm not that old!
Last edited by motto; 26-12-12 at 10:54.
|