Richard
To answer your question- Does the image Jon posted of the driver hand and foot controls show a third foot pedal to the left . . . a gear change pedal (GCP)?
--Yes there is a third pedal down at the left beside the final drive and it is attached into the side of the center gearbox. I do not know what it does, it may have been a carry over from other design and do nothing or it may be a gear change lever. I will need to take a closer look when the weather is warm again.
You also mention cletrac steering with dual tillers, do you have some insight into what final drive assembly this is? A "normal" final drive (like a T16) doesn't have a transmission style shifter built into it with 5 gears and a reverse lever.....
This makes me wonder if the transmission is almost superfluous and the final drive can act as the transmission? Or it is geared in such a way as to allow massively low and high gearing (might be why the 5th gear is locked out with a bolt) 5th and 5th would be really fast. 1st and 1st would climb almost any hill with a load under tow. The reverse lever would act like a ferret and give you the same 5+5 in reverse....
|