-the pipes are 3/4" plumbing pipes with an OD of1 1/8"
-the vertical pipes are 21 1/2" from the bottom end to the start of the bend at the top edge of the horizontal pipes.
-the vertical pipes protrude through the bottom of the channel 3/4"
-the end pipes are threaded 3/4" pipe thread below the channels.
-the bends on the bows are 6" radius on the long side of the pipe.
-the centre bow in the pipes is 3/4" above straight.
-the angle braces are 13 1'2" on the long side
-the pictures show how the horizontal pipes are made.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
|