Cable continued
OK so... anchor pins are where they are supposed to be.
Eccentric cams where they are supposed to be.
Handbrake lever and eccentric behind it have been set up correctly
The cable is simply not long enough (AS IT HAS COME OUT OF THE BOX)
A solution is... to slice a section of the outer part (ie that the cable slides through) at one end.
Probably the end that slides into the backing plate. This will enable the cable to attach to the hand brake lever without starting to pull it, which starts to move the shoes onto the drum.
Suggestions welcome
__________________
Pax Vobiscum.......may you eat three meals a day & have regular bowel movements.
|