[RichCam]

So, with the more recent 6 cylinder 250 running like a top, we discovered that it was "frozen" in first gear. The only way to run the engine was with the clutch in. After jacking and blocking the complete chassis, we confirmed first gear only capability. Unfortunately, we could not properly access the upper transmission case cover without lifting the cab completely off of the frame. We needed to do that anyways so it was now or later. After removing the shifter, removing the cover bolts, we discovered that the transmission was stored without fluid in it. The shift shafts had corroded slightly and the shift forks were locked in position. After some gentle persuasion and lot's of M16, my father and Jim were able to free the forks and lift off the case cover. We will now clean everything inside and begin re-assembly.
As well, all four tires were removed, rims pulled and brake pads including emergency brake activation, brake cylinders were inspected. Everything looks great except for the emergency brake cables. They have been sent out to be rebuilt.