Thanks Ed, but as the saying goes "there are many like it, but this one is mine".
One area I am happy with is that large hole that used to be on the back near the towing ring. It did not end up perfect, but if you didn't know it was there before you would not pick it out now.
Another challenge is going to be that I found a rivet broken holding the trail spike bracket on the left side. The casting will end up being cracked if that is not attended to. I am considering buying a long rivet and threading it, then bolting it into place with the nut on the inside. I know blacksmiths bolt supply sell these. I may look at that avenue as well.
Last edited by rob love; 10-01-21 at 04:32.
|