Hi JACQUES
I would take advantage of your good kowledge about engine to ask you an other question please.
I would like to inquiry about the link between the oil filter canister and the engine. At the rear (left side) of the engine we found two parts*: one is an electrical sensor (which aim is to indiquate the value of oil pressure when the engine is running) and the second is an outlet which is used to link a pipe to the upper inlet of the oil canister. (It's the ouput of the oil pump).
At the bottom of the oil canister there is an other outlet which should be used to return the oil to the engine with a second pipe and my problem is that there is no inlet for these pipe on the engine.
Having read some forum about these subject, I learned that these inlet should be below the exhaust pipe. I have clean out of paint the below of the engine but I have found no entry for the return of oil.
Please did you have an explanation about the behaviour.
Best regards Serge
