Quote:
Originally Posted by sth65pac
I removed the temporary brace and the 1/4" rivet misalignment has become about 1/16" ordered additional rivets but they are too small so I'll have to make up some with steel rod.
I bought a 'toy' oxy propane kit which is pretty useless. If it doesnt heat the rivets hot enough I will have to get a proper Oxy Acetelene kit for riveting.
Cheers,
Ian
|
The chassis do spring when you take the brace out . usually have to jack or tie them back in to location . Usually easier to bolt in and tighten first with tight fitting bolts and remove as you progress along
I use a LPG oxy kit but just use the cutting head instead of heating tips to get it hot enough . Not as quick as acetylene but don't have to pay dead rent on the acetylene bottle as well as oxy tank