[Alex van de Wetering]

I was afraid the bumper wouldn't fit properly as one or two holes I drilled were at a slight angle, but as you can see in the pictures the holes in the bumper have enough play to get all 8 bolts in!

The extractor is quite a simple tool , but it worked. The pins, or flutes, sometimes break, but even with a piece broken off they will still do the job. You can also buy seperate new "flutes". The only trouble with the tool is that they only work for one size tap....so if you have a habit of breaking taps, you will need a variety of different size extractors.

Alex