I have to admit, this has been my least favourite job, pulling all the suspension apart, removing all the rust, cleaning and painting has been time consuming. But then you get it all back together and it’s a big step closer.
I learned a trick today, when compressing the spring, if the rod moves left or right of the other end of the of the suspension arm, it is very difficult to get get the other springs and the ball end in. The trick was to place a washer under one edge of the spring compression tool to get it to pull the rod straight. Also, this job is definitely a lot easier to do with the suspension on the carrier.
Now onto the front two units, hopefully in time for the arrival of the re-rubbered wheels.