Restoring the interior of the box of the Wire 5 project
Hi Bob,
The plywood i removed from the box and kept as samples for placement of the accessories was around 3/8 '' thick all over , walls and ceiling . 1/8 '' would be paper thin and could not of supported the original shelves . My decision to go with 1/2 '' was based on durability , soundproofing and the ability to anchor heavier shelving if needed . Resistance to moisture was also a factor.
The plywood i removed was all wavy from the moisture, humidity and water seeping through from all the years it spent outside.
Going to 1/2'' instead of 3/8 '' should not detract too much from original and it will not show. Neither will the insulation.
What will detract from original is the floor . I will be putting in a 3/4 '' plywood floor instead of the original '' Decktread'' . I hate cold feet . I will paint it battleship gray. The floor that is . The walls will be white of course.
Thanks for your comments. I am open to ideas , this is an ongoing process.
Cheers and good night.
__________________
44 GPW / 44 C-15-A Cab 13 Wireless 5 with 2K1 box X 2 /
44 U.C. No-2 MKII* /
10 Cwt Cdn Brantford Coach & Body trailer X 2 /
94 LSVW
Last edited by Robert Bergeron; 09-12-15 at 06:11.
Reason: spelling
|