Upper Tool Box Door and Rear Measurements
David,
The first set of drawings you sent does not include one for the door to the upper tool box. As such I don't know what the hasp looks like. Also, the measurements for the sloped bottom portion of the back panel where the spare tire rests are not given. If the sectional drawing is to scale the portion removed would be 4" each, back and bottom.
A second question regarding ther bottom tool box: Do both the top and bottom doors' flanges go on the outside of the box or the inside? The drawing of the bottom sloped panel shows it to be 12 1/4" wide while the drawing of the door shows it to be 13 3/4" wide. Something doesn't compute.
Regards,
Jim
|