Hi Rob,
My splash shield arrived today, from Midwestmil. I will give it a spray coat of truck bedliner before trying to install it in my Cdn2. You say that there are 2 bolts on top of the wheelwell, 1 on the inside under the rear seat, and 1 L-bracket that is attached using a bolt holding on the side body reflector.
The plate from Midwestmil has 1 additional nut plate on it, it is up higher on the inside above the rear benchseat cushion. Was this one not used?
For what ever the reason, my jeep does not have the 2 holes on the top or the inside of the wheelwell. So l need to be careful not to make any mistakes drilling holes. Thanks
Richard Mix Jr.
CFR 6707832
|