Spent yesterday and today painted the transfer case parts. First in DOM16 ( Cnd version of POR15). Then in tie coat primer. Today was the final colour of SCC2. I also picked up the order of Speedi Sleeves and oil seals. I’ll give the paint a few days to harden up before installing the seals and the sleeves. Next week I should have the bearings and cones. I also had all the fasteners from the case in a tumbler with blasting grit in order to clean them up. I left it running for about 20hrs. Followed up with a quick buffing on a brass wire wheel they are good to go.
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
|