Bofors breech help
That breech looks ok, you have to knock the sear out first which will release the spring and release the cams. Then the breech will drop out the bottom. , it may need a tap.. You dont need any special tools to remove the coil spring. But DO NOT attempt to dismantle the spring housing as its under tension.
You will need a crow bar for a lever and a drift and a hammer.. But if your wacking it like hell your doing something wrong..
I will get some photos on here to help you.
Brad
Last edited by Brad Deckard; 04-01-18 at 13:25.
|