A few more things are now out of the way today.
First off, I removed the mounting screws for the two PA TUNING COUNTERS. It was again interesting to notice, with this type of work, the number of screws one finds that have clearly been serviced at some point and they are missing their lock washers.
In any event, when the last screw came out of both COUNTERS, they both rotated very so slightly in a counter clockwise direction. You can just see the lower left side screw holes are now slightly blocked by the mounting plate of the front of each COUNTERS. Nothing a round wooden toothpick cannot realign when the front panel is ready to go back on.
David
|