Some of the ebay spare parts cases have the embossed lettering and are 5C for the 19 set. With not much effort with a hammer and punch the C could become a B. The others have no lettering and would need a decal or a stencil. I have no idea which ones I'll end up with but they'll both become 5B cases.
Here's a list of the spare parts case contents from the operator's manual:
Ammeter H. F.
350 mA No 1
Brushes, D or M, No 4
Brush holders No 5
Brush sash tool No 2
Bulbs, 6V J (4 req)
Lamps, operators, No 2
Tablets, calibration
No 1
No 2
No 3
No 4
No 5
Voltmeter, pocket,250 volts, No 2
Case for meter
I have the voltmeter and case and the operator's lamp.
What's the brush sash tool?
What are the calibration tablets?
The left picture is one of a 5B that Bruce sent me. The dividers are riveted in place.The right picture is a newer 5C but it's the same dimensions and I put my voltmeter and light into place. In Bruce's the green circle obviously holds the ammeter and the compartment on the right is for brushes and the other small bits.
__________________
1940 Cab 11 C8 Wireless with 1A2 box & 11 set
1940 Cab 11 C8 cab and chassis
1940 Cab 11 C15 with 2A1 & Motley mount & Lewis gun
1940 Cab 11 F15A w/ Chev rear ends
1941 Cab 12 F15A
1942-44 Cab 13 F15A x 5
1942 cab 13 F15A with 2B1 box
1943 cab 13 F15A with 2H1 box
1943 Cab 13 C8A HUP
1944 Cab 13 C15A with 2C1 box
1943 Cletrac M2 High Speed Tractor
MkII Bren gun carrier chassis x 2
Last edited by cletrac (RIP); 16-02-17 at 05:06.
|