Thread: M62 wrecker
View Single Post
  #1  
Old 28-09-18, 22:59
rob love rob love is offline
carrier mech
 
Join Date: Feb 2003
Location: Shilo MB, the armpit of Canada
Posts: 7,521
Default M62 wrecker

A new piece to the Shilo Museum, this vehicle was parked for the last 25 years behind the Regina Armouries. Knowing it was there, and having a soft spot in my heart for wreckers, it took almost 3 years to get it transferred to us.

Once parked, it seems like time stood still for it. Full tanks of fuel have turned into yellowish poo, the batteries are cracked, the right door was hanging by it's check rod, and the engine was stuck.

Niel Yeo was by the other day and with his youthful exuberance, managed to turn the fan and get the pistons moving again. They are now soaking in oil. Today I replaced both right door hinges (only had 3 screws break), so the door isn't going to fall on the next guy who opens it.

Come Monday, I'll dump the engine oil and replace with fresh, as well as try and pressurize the oil system. Then I need to clean the fuel pump and line to the carb, at which time I'll energize the system and see if she goes.

These were the first wreckers I ever drove back in the 80s. Canada purchased 117 of them, and the years of mfgr were 52,53,55,and 56. This one is dated 12-12-55 and the engine was rebuilt by Tecmotive in 1990. There was a further purchase of 5 tons, including wreckers, in the 1970s. At that time, the gassers were relegated to the militia and airforce bases, while the regular army got the diesels.

I sold the idea to the museum here because the Honest John missile system used one. They had an m62 wrecker which was solely dedicated to the assembly of the rockets onto the launchers.

In a couple of the photos you can see some examples of attempted first line body repairs that will require attention. Especially note the door hinge on the hood. It looks like initially someone tried to mount the door hinge next to the original hood hinge location. Note to whomever came up with this idea: hinges, when in pairs, must have the hinge pins in the same plane or else something (the hinge or the surrounding metal) has to give. I hope you were not proud of this work.



Overall though, it appears to be in good condition....you gotta love Saskatchewan/Manitoban vehicles.
Attached Thumbnails
DSC01336.jpg   DSC01334.jpg   DSC01333.jpg   DSC01332.jpg  

Last edited by rob love; 29-09-18 at 03:08.
Reply With Quote