View Single Post
  #9  
Old 15-07-11, 11:16
ajmac's Avatar
ajmac ajmac is offline
Alastair McMurray
 
Join Date: Sep 2006
Location: Lincoln, England
Posts: 433
Default

The parts book is incorrect in terms of the specific images used for the fan drive (shows UC), however the engine images are correct. It shows UC parts, but the engine is from a 7V and uses all the normal truck parts, however the fan is a special. Attached is an original wartime photo of a Loyd engine, you can see it is the same as the 7V 'Instruction Manual' picture that I scanned in. The dual pully and fan bolt directly onto the Dynamo shaft.

Perhaps people can ID the springs used: Inner = TL1386, Outer = TL332

Interestingly on the same page of the parts book it lists the road wheels, five different types! All part No: TL1572A, listed under this as drawing refs is: TL94 (obsolescent), TL14702/1, TL14702/2, TL14722/1 & TL14722/2, presumably if we could find these drawings one of them would be the wheel with the round holes....
Return rollers: TL986SA or TL860SA with various wheel options on drawings: TL14061, TL14752, TL14762/1 & TL14762/2
Attached Thumbnails
LC27.jpg   BritishFlatheadV8.jpg   LoydPartsBookV8.jpg  
__________________
Alastair
Lincoln, UK.


Under Restoration:
1944 No2 MK2 Loyd Carrier - Tracked Towing
1944 Ford WOT6 Lorry


The Loyd on Facebook

Last edited by ajmac; 15-07-11 at 11:36.
Reply With Quote