View Single Post
  #421  
Old 08-11-20, 01:15
David Dunlop David Dunlop is offline
Registered User
 
Join Date: Feb 2006
Location: Winnipeg, MB
Posts: 3,384
Default COVERS, Metal, Blowers, Electric 3-11/16 inch dia. No. C1 ZA/CAN 4243

Good outdoor painting weather is rapidly disappearing here these days, so I took advantage of a chance to strip the old paint and varnish coats off this item yesterday and get it ready for priming.

I was surprised at how bright and shiny the original metal work was underneath the layers of paint.

Originally, the interior of these COVERS was left in a bare, plated metal state, but traces of overspray through the wire screens was still evident around the inner rim. Over the years, moisture had puddled on the lower inner rim and some surface rusting needed to be cleaned away. For the sake of protecting this inner surface in the future, I have decided to prime it, but only finish coat the exterior surfaces.

For such a small part, the extent to which it underwent spot welding it worth noting on the exterior view. You can see a lot of spot weld dimples all the way around the front rim. I am thinking a number of these welds were first applied to hold the wire screen securely in place. Then the inner C-Ring fitting was installed and also spot-welded in place, to prevent the open rim of the wire screen from moving about and perhaps unravelling.

If you browse back to Post 285, you will see what this COVERS looked like when first removed from the Sender panel.

David
Attached Thumbnails
COVERS, Metal, Blowers, Electric 3.JPG   COVERS, Metal, Blowers, Electric 4.JPG  
Reply With Quote