Attached are some pics of the rear spring work
One of the clips actually broke while removing the remains of the old bolts. Bob mentioned earlier in the thread that they were quite easy to make from flat stock, which is what I did. Some bending, hammering and drilling later the clip was done (and grinding as the flat stoch was actually to wide).
I used the grinder to cut the head of the old rivet. I cut a slight oversize hole in the new clip, chamfered the hole and welded the new clip to the old rivet. The lot was then assembled with new nuts, bolts and bushes/spacers.
Alex
__________________
Chevrolet C8 cab 11 FFW
BSA Folding Bicycle
|