Hi All
Sorry for the long delay but the fittings of course got back ordered then I for got to post them.
The Flex lines to the oil filter body are as previously mention -Weatherhead/Eaton dug out the part numbers, the flex lines are Eaton 81430-16 and 81430-12 last two digits are the length so you can get the exact length after all the other fittings and lines are in place. NAPA number is WH 8143016 and WH813012 again last two digits are the length.
The Inverted 1/4" tube flare
Attachment 53254 is WH6100x4 or Eaton 6100x4 straight connector is 6200x4 and Elbow is 6400X4
The best source of brass fitting information I have found that are current is
http://www.eaton.com/ecm/groups/publ...dev_216279.pdf it is a PDF document so you can use your PDF search feature (open document then Ctrl F) to search a fitting if you know the Eaton or Weatherhead part number. If you don't know the part number which is normal go to Brass Products starting on page 25 - 57 for pictures and dimensions with part numbers. Then jump down to pages 100-108 for the next section containing fittings used on CMPs.
Hope this help
Cheers Phil