Thread: Wanted: 3" Mortar Parts
View Single Post
  #2  
Old 16-04-17, 01:05
horsa's Avatar
horsa horsa is offline
David Gordon
 
Join Date: Nov 2005
Location: Lorena, Texas, USA
Posts: 619
Default

Some of the goodies you need for a 3-inch mortar can be found on my sales page. Its all drying up and I wish we still had even a quarter of the mortar gear we once had available.

http://www.visualcollector.com/Tommy...TommyStuff.htm

Still have most of the variations of mortar firing pins and firing studs. Also the launching cartridge extractor tool with webbing frog. And one set remaining of the long carry harness slings for the barrel and base plate. The leather muzzle cover has the quick release setup used in conjunction with the barrel sling. Some items are listed in the weapons section and some with the webbing/equipment section.

Shot below is from the Imperial War Museum and shows the long-carry webbing for the 3-Inch mortar that I was referring to.

__________________
David Gordon - MVPA # 15292
'41 Willys MB British Airborne Jeep
'42 Excelsior Welbike Mark I
'42 BSA M20 Motorcycle
'43 BSA Folding Military Bicycle
'43 BSA M20 Motorcycle
'44 Orme-Evans Airborne Trailer No. 1 Mk. II
'44 Airborne 100-Gallon Water Bowser Trailer
'44 Ford T-16 Universal Carrier
'44 Jowett Cars 4.2-Inch Towed Mortar
'44 Daimler Scout Car Mark II
'45 Studebaker M29C Weasel

Last edited by horsa; 16-04-17 at 01:13. Reason: Added photo
Reply With Quote