Thread: Info needed: ID needed on these parts
View Single Post
  #3  
Old 21-02-18, 05:00
Jacques Reed Jacques Reed is offline
VMVC
 
Join Date: Jul 2012
Location: Victoria Australia
Posts: 859
Default Identifying CMP parts?

Hi James,

Can help perhaps with the first picture and the last picture.
First one looks like a rifle barrel clip as attached to a rifle holder. See attached.

The last picture is similar to two items which I took off a spare cabin I had. See attached. They were located at the rear of the cabin at the joint between the roof and lower back section. Unfortunately I took them off pre digital camera days so I did not record the location. Think they were in the middle of the cab however. Now I photograph everything 10 times! In the days of 35mm film that would have cost a tenner.

I have no idea what they were used for. Only guessing maybe a map case holder to drop into the slot. Some canvas map cases have a steel band across the back which could fit into it. Could be 100% wrong, not the first time, but someone will probably know their purpose.

Hope this is of some help.

Cheers,
Attached Thumbnails
IMG_0037.JPG   IMG_0061.JPG  
__________________
F15-A 1942 Battery Staff

Jacques Reed
Reply With Quote