View Single Post
  #45  
Old 21-09-12, 23:21
Alex van de Wetering Alex van de Wetering is offline
Moderator
 
Join Date: Mar 2003
Location: Hoofddorp, The Netherlands
Posts: 2,670
Default

I didn't get much done last week, but the front springs have been removed. The rearmost pins attaching the front springs to the chassis were nicely lubricated and in good condition (and could be screwed out by hand.....quite the contrary of the one I had to remove from the separate chassis earlier!). The front pin/bolt and rear lower pin however are very worn as can been seen in the picture. I really wonder if replacing the bushings and pins is enough here....

Also see the difference in my front sprins...the right front springs (bottom one in the pictures) has an extra leaf added and the clips lengtened.
Alex
Attached Thumbnails
Rear.jpg   springers.jpg   Springers2.jpg  
__________________
Chevrolet C8 cab 11 FFW
BSA Folding Bicycle
Reply With Quote