[Mike Kelly]

hi Richard

The Rochester would be a better carby . The 216 version has the smaller throttle bore. The 235 version seems to be more common over here , it has the larger throttle bore.

There is a weakness in the C8 drive train, the uni joint just behind the gearbox tends to fail. The uni joint is inside the round sphere , it drives the shaft inside the torque tube.

Do a search on this forum for C8 .

The front wings on your C8 look a little odd , sort of like somebody has made them in the back yard ! if you can find them, the wider wings from the larger 15cwt or 30cwt or 3 tonners will fit the C8 . You must narrow/cut the wider wings down , make them narrower, that's what the factory did ! The 13" wheels do appear to be "out of scale" under those huge long wings !