Now for the left side fender....This one was worse. I started by trying to bend it back into shap as much as I could. Than welded in a strip along the edge where it is bolted to the cabin. This time is cut out a larger section of the fender....right to the nicely rounded edge on the front and side of the fender. This was a better approach than what I did with the other fender, as it gives a much nicer result......less risk of a peak where the new metal is welded to the old.
Holes for the fender supports and headlights were drilled after patch panels were all done.
Alex
__________________
Chevrolet C8 cab 11 FFW
BSA Folding Bicycle
|