Mike and all
Here is a picture of what both side plates should look like.
The dimensions are
Length = 17 5/16"
Height = 11 3/16"
All the rivets are 3/4" of an inch in from the edges. The side ones are 1 1/2" from the top to its center and then 4" and 4". The ones along the bottom are from left to right as follows. 2" in from the edge, then to the next one is 3 1/2", 3 1/4" 3 1/4", 3 1/2"
The right side hole is 3" down from the top edge and 2" over.
__________________
Jordan Baker
RHLI Museum,
Otter LRC
C15A-Wire3, 1944
Willys MB, 1942
10cwt Canadian trailer
|