Stowage location of the cold weather blanking board depends on MK-I series or MK-I/MK-II upgrade and MK-II production. You would not be placing the blanking board behind a MK-II style gunner seat back.
As a result, there are slight differences in the board to accommodate a retaining bolt hole in one corner. That would allow the MK-II* board to be stowed along the lower hull left sidewall at the gunner left leg, similar to the BREN cleaning rod location on some of the MK-I/MK-I* series where equipped with a BREN. One of the left hand grip retention nuts is replaced with a CTL 14333 knurled knob, and the board is fitted on the stud and retained by the knob.
The blanking board compliments those additional efforts with the cold climate kit including the canvas engine cover opening, swinging deflector plate in the engine ventilator intake opening, and sliding rear lower engine cover panel.
Last edited by Michael R.; 23-03-14 at 21:54.
|