Wiring Specs
Me Again, James.
Your plug will have three sockets: two parallel and the third perpendicular to them.
Orient the plug so the two parallel sockets are at the top.
- Top socket is a red lead with a black tracer. It runs to Pin 6 on the dog bone.
- Middle socket is a black lead. It runs to Pin 1.
- Lower socket is a brown lead. It runs to Pin 3.
In the dog bone, the wiring should be:
- Pin 1: Black, Negative Ground.
- Pin 3: Red, +12 Heaters.
- Pin 6: Red with yellow tracer, +275 volt HT2
I suspect the stub of the original cable is still in your 6-pin, so that should help you as well, if it is.
Have fun. And stay safe!
David
|