Thread: How To: C15a Wire-3 restoration
View Single Post
  #797  
Old 09-05-20, 00:25
Bob Carriere Bob Carriere is offline
Moderator
 
Join Date: Mar 2003
Location: Hammond, Ontario
Posts: 5,191
Default Flex lines.....

Hi Jordan

With the flex of the cab 13 anbd tyhe CMP frame flex lines are good insurance.

Doesn't matter what angle and how many pictures you take you will always find a spot you missed....

From what I have of what is left that is deemed possibly original the selection valve had three flex line in and out ..... and some of the frame filters had flex lines,,,,, and there was always a flex line entering the fuel pump with the hard line clipped to the frame and on to the filter. So you are only critical at the pump just replace the short piece. the out put of the pump can be hard line as it is clipped to the water/radiator elbow .....and therefore moves with the engine block.

One line strangely enough that is subjected to engine torque yet has no rubber joints is the steel steam line from the rear of the block to the radiator neck or tank.......
__________________
Bob Carriere....B.T.B
C15a Cab 11
Hammond, Ontario
Canada
Reply With Quote