Welcome, Nathan, and ditto to all the above.
A couple of points about your F15A. It has an Australian '44 pattern cab, meaning the 'hard' doors were not fitted, but demountable canvas doors covering a flat steel frame. You can tell by the inserts in the leading edge of the door opening, and there will be a flat across the bottom edge to prevent objects on the floor vibrating out through the door openings as you drive along.
As you disassemble, try and locate the chassis number stamped into the top flat of the right side chassis member adjacent to the front (engine) cross member. Probably begins with '3G' or '4G'. This will be the key to locating your particular truck in the vehicle registers in AWM126, which are now online - hours of amusement ahead of you looking for your vehicle.
NO question is too elementary or simple - we are all glad to help a fellow enthusiast, so ask away.
Mike
Last edited by Mike Cecil; 03-05-18 at 17:52.
|