Jeez, you guys are good!
Eddy, I rebuilt the clutch about 3 years go with the best parts from 2 used clutches we had and then went onto another project. But I covered the clutch up well, so when we checked the clutch recently, it still spun freely when disengaged, despite outside storage.
jdm, a preoiler, like our T54 has, would be great. Wonder how easy that is to install? But you know, considering we will run this Cent about 50 miles a year at the most, it's unlikely we will see any problems from bearing or bore wear in my lifetime!
45jim, great info! Now the question is do we do it the easy way and pour light oil into the cylinders through the carbs while idling like Perry says, or do we pull the intake side plugs and squirt the oil in? I kind of like Perry's way because it is easy, and also it gets oil on the valve stems to some extent.
Malcolm
|