Quote:
Originally Posted by Johnny Canuck
It would appear that a special mounting bracket is required for a Universal Carrier installation.
The Packing Piece No.1 (wood, rubber, bakelite) and a Seating Plate Metal are required. These are fastened to the Variometer with 3 screws ( the 3 holes are visible on the underside of the Variometer case)
The problem is how to fasten this assembly to the vehicle as you can not reach the mounting screws once the Variometer is attached to the plate assembly.
A Brackets, Metal, Mounting, Variometer No.C1 (ZA/Can 1376) is required to mount it to the Vehicle.
This bracket is just visible as the hashed line behind the Variometer in the picture you posted.
Geoff
You need items 2, 27 and 28
 |
Hi, Does anyone know where I can get the top two straps (item 10) of the featured drawing, also the 6 pin dog bone.
thanks kevin.
__________________
2pdr Tank Hunter Universal Carrier 1942 registered 11/11/2008.
3" Mortar Universal Carrier 1943 registered 06/06/2009.
1941 Standard Mk1 stowage Carrier, Caunter camo.
1941 Standard Mk1 stowage Carrier, light stone.
10 cwt wartime mortar trailer.
1943 Mk2 Daimler Dingo.
1943 Willys MB.
1936 Vickers MG carrier No1 Mk1 CMM 985.
|