DEAC
Delete No. 1 not req'd.
Bolt face must be ground, or cut so it cannot pick up ammo.
ALL full auto parts must remain in firearm and all must be permanently destroyed by grinding and welding in place.
Correct on mags. originally they had to be welded in the weapon but this is not enforced.
The receiver has to be permanently welded closed.
Trigger parts cannot function but the bolt or slide can be moved back.
A hardened steel pin of minimum inside barrel dia. up to 1/2 inch must be installed in a hole drilled through the frame and barrel and into the other side of the barrel and welded in place with hardened rod.
|