[Bob Carriere]

Installing a Jeep engine (rebuilt for the Cdn forces in '86) for a friend.

Where is the timing mark for the F engine.... circa 54....just one valve under the valve cover. At 10 o'clock on the front of the timing cover seems to have a folded piece of steel that could have been the timing reference....but on the rebuilt it is folded flat against the cover behind the pulley and covered with the rebuild grey paint.

Would be nice to turn the engine by hand to set up number one cylinder top dead center but can't find any holes to crank it by means of the ring gear... like a Chev 6.

Grant will provide a shop manual soon to help us out......

On the Chev once you have TDC established and the sparkplug wires in proper order you can have someone crank the starter and slowly move the dizzy by hand until it catches..... refinements come later. Tried the same with the Jeep engine and all I could get was farts and barks...... so we have sparks but not running.

Puzzled!!!!