Quote:
Originally Posted by sth65pac
Yes,
I read it through twice but numbering the seals isnt helpful to location.
I know that you are referring to seals but these are leather, not neoprene.
Also its too confusing as you and others have not identified which seal is where?
|
Hello Ian,
See this message in the thread:
http://www.mapleleafup.net/forums/sh...430#post254430:
Part number: *C01Q-1190-B
Part name: Seal - front axle hub grease leather oil seal
cross references to SKF 45150:
http://www.skfextranet.com/catalogs/...il.asp?s=45150 which is a modern Nitrile seal.
To make sure, remove the old seal and check the following measurements:
OD: 6.25"/ 159,8 mm
ID: 4.5"/ 120 mm
If your old seal measures up to this, contact your nearest auto parts center and order SKF 45150. If they don't stock SKF they will be able to cross reference it to another brand.
HTH,
Hanno
PS: SKF took over Chicago Rawhide many years ago, but are now rebranding them again as CR Seals - meanwhile the part numbers stayed the same, so CR 45150 = SKF 45150.