It is pretty clear the wiring went on as the truck was built.
Hi Bob
Good to hear the harness is going well. Besides yoga is good for use. I would not be surprised to hear that gal's got this job on assembly line.
Now having put new harnesses in both Pattern 12 & 13 after the trucks were assembled I can conclusively say that's not how it was done on the assembly line. I'm sure the started when it was a rolling chassis.
First time I replaced the harness on my HUP years ago, it has fully assembled took the old one out copy it and then installed the copy. When the HUP was over hauled twenty years later put the harness in starting with the chassis then once the bare body was in place much easier.
Anybody working on a Pattern 13 do the harness without the nose on, lot easier to wire.
Also as I mentioned on my Web site if you are making a new harness make it several inches (6") longer than the original, particularly at the dash end.
Cheers Phil
|