Quote:
Originally Posted by David Dunlop
With regards to the Connector on the rear of the receiver missing its R-Clip, if you have spares to spare that would be a big help. Thanks.
David
|
Consider it done.
Looking at the photo of the broken screw, I suspect the culprit attempted to undo it using a screwdriver. This is a mistake, as all the screw slots are in-line with the contact slot (twisting the screwdriver would deform the contacts) and the obvious assembly/disassembly method is with a box spanner or nut spinner on the rear of the connector. (Also the nuts are sealed with varnish, so may be very hard to undo without applying a suitable solvent (or heat) first.)
Chris.