View Single Post
  #14  
Old 27-04-18, 02:01
Robin Craig's Avatar
Robin Craig Robin Craig is offline
Registered User
 
Join Date: Jan 2006
Location: Near Kingston, ON, Canada
Posts: 2,153
Default

Just a couple of quick comments more.

I will never pour concrete now without taing the time to put radiant heating pipes in the floor and the insulation associated with it ever again. That is one you can not recover from. In floor heat is magic in my book.

The other comment is of a more fluid nature.

If you live with the confines of a large city and don't have a septic system this wont be of much interest to you.

Our workshop at work has it's own septic system and drainage, the pipework is a bit more complex and longer than we would like. We experience some problems a while ago and as a result determined that too much solid waste in the grey water was coming from the big wash up sink in the shop. There are a number of us who use it and we are all saints all the time.

So we put some efforts into finding a way to capture that material.

The answer is this clever device. Made by Liquid Assets in the US of A and called the Gleco Trap it replaces the traditional P trap under a sink with a removable reservoir and a drain valve.

The valve on the side allows you to drain the column of water above the reservoir before you remove the jug. We bought it mail order from in Canada and it was from memory about $120 inc postage of there abouts.

We have found that silicone grease is good at making it seal properly after a clean out which we do monthly. Our problems have stopped an no one has to own up.
Attached Thumbnails
sink trap 01.jpg   sink trap 02.jpg   sink trap 03.jpg  
__________________
Robin Craig

Home of the Maple Leaf Adapter
2 Canadian Mk1 Ferrets
Kawasaki KLR250 CFR 95-10908 ex PPCLI
Canadair CL70 CFR 58-91588
Armstrong MT500 serial CFR 86-78530
Two Canam 250s
Land Rover S3 Commanders Caravan Carawagon 16 GN 07
Trailer Cargo 3/4 T 2WHD 38 GJ 62
Reply With Quote