[Alex van de Wetering]

Just as I wanted to re-assemble the rebuilt Front springs I realised I forgot to order new seals for the spring pins. The "Filling station" offers cork-rubber seals for the early 40's trucks and rubber ones for the late 40's trucks. "Chevs of the 40's" only stock the full rubber type. In the end I found a dealer in the UK who had the seals and they were here in Holland the next weekend with some help from my brother who lives in London.
Assembling the springs was only a few minutes work; new bolts, pins, bushes and grease nipples were fitted.
After the advice from Bob and Phil I attached the upper fender supports and indeed....there is another bolt hidden between the fender and support....the last bolt I needed to remove before I could disassemble the nose panels with the vents......well, after I realised left and right are combined into one with a small panel in the middle......the one with the hole for the engine crank.
Thanks guys! Most of the nose is now removed.

Alex