[Alex van de Wetering]

Most of the last two weekends went to further disassembly of the C8, now basically leaving the 216 and the frame. Next weekend will hopefullly see some assembly work again!
While disassembling I came across a few details hat I found interesting to share;

The lower fender/arch bar supports are bolted to the frame with four bolts. I was surprised to find that the lower nuts weren't actually nuts, but flat stock with thread tapped into them. This was the case on both the left and right hand side of the truck.
Between the arch bar and the support on the right hand side, I found two shim-type thingies! I guess to level the cab. Anyone seen these before?

Last pic is of the drivers seat. In my truck the drivers seat is placed on top of some wooden blocks, while the co-drivers seat is placed on a slightly angled piece of sheet metal.

Alex