Steering knuckle studs
In case you don't know this:
There are two special dowel studs that locate the steering arms onto the steering knuckles . It was discovered that the steering arms were working loose so they came up with a fix bulletin.
The dowel studs have a 3/8" wide middle section . RFJP doesn't have them, I will make some myself on the lathe.
__________________
1940 cab 11 C8
1940 Morris-Commercial PU
1941 Morris-Commercial CS8
1940 Chev. 15cwt GS Van ( Aust.)
1942-45 Jeep salad
Last edited by Mike Kelly; 03-04-21 at 03:56.
|