View Single Post
  #134  
Old 01-12-15, 22:08
Alex van de Wetering Alex van de Wetering is offline
Moderator
 
Join Date: Mar 2003
Location: Hoofddorp, The Netherlands
Posts: 2,670
Default

Bob, I did indeed think about cutting the link and welding a bolt to the end, but I wasn't completely sure where to weld as I would also need the small lip to keep the retainers in position. This meant I either had to weld on a washer to act as a lip, or weld just below the existing lip.

Mike, regarding your question, I have no experience on driving CMP's, so I have nothing to add to Bob's and Phil's comments.....well, one addition maybe..... The front shock links on the C8 fix to a thick plate that is bolted to the front axle, as you know. One of these plates on my C8 did show wear and the round hole turned oval in the meantime. After checking I noticed the link and hole are not completely in-line, which obviously resulted in the hole turning oval.....so, there is some movement, but probably not too much as Bob and Phil described.

Alex
__________________
Chevrolet C8 cab 11 FFW
BSA Folding Bicycle
Reply With Quote