Standard starting procedure for Leopard AS1 was to hold back the accelerator pedal and crank the engine until the oil pressure started to rise, then let go the pedal so the engine started.
But I agree with Rob about a jeep engine having been sitting for under 6 months. Nothing oily should have 'dried out' in that time, with oil retained in bearings and on journals. The long cranking time should be more than enough to raise a little oil pressure before starting anyway.
I'd think the more likely problem after 6 months would be the gunk from modern fuel left within the carbie after evaporation while in storage. That stuff sticks the needle and seat together and clogs inlets jets. It is why I have a notice in the workshop to 'start engines monthly', and that includes mowers, generator, jeeps, tractor.
Mike
|