Quote:
Originally Posted by Lynn Eades
Israel, there is a cut out piece on the left side to allow for the left side bell crank. There are two strips welled to the bottom that are tapped so that the bolts coming up through the floor can screw into. (5/16" (8mm) thick and cross ways) There is also a fibre block that two spare spark plugs screw into.
|
Lynn Thanks for your Note. (I saw it after bending over the bins) This goes into the space of the rod by pressing the brake, but for more confidence during the week I will fix it and create a cut according to the photo you posted on MLU
Thanks , Israel